THE MODEL ET-95-H IS A UNIQUE TUBE AND PIPE BENDING MACHINE THAT ALLOWS FOR MULTI BENDING ON A SINGLE PLANE. THE RESULTS OF THIS UNIQUE BEND HEAD ARE "U" SHAPES, RECTANGULAR, SQUARE OR OTHER SHAPES. BEND RADII CAN VARY ON ROUND OR SQUARE TUBE DEPENDING ON YOUR REQUIREMENTS. FOR SQUARE TUBE, BEND RADII CAN VARY FROM 3/8" (9.52MM) TO 5" (127MM). FOR ROUND TUBE, MODELS CAN BEND RADII FROM 1" (25.4MM) TO 5" (127MM). THIS UNIT IS ELECTRIC DRIVEN AND HYDRAULIC POWERED. IT CAN BE PORTABLE OR STATIONARY. BEND CONTROLS VARY FROM MANUAL TO AUTOMATIC. (2) PALM BUTTONS ARE GENERALLY REQUIRED.

• MACHINE IS MOTOR DRIVEN AND HYDRAULIC POWERED
• PLC SYSTEM TO CONTROL MANUAL OR AUTOMATIC CYCLES
• 5 HP TO 25 HP (CUSTOMER SPECIFIES HOURLY BEND RATE)
• 230 - 440 VOLTS, 3 PHASE, 50/60 CYCLE
• 3000 - 5000 PSI HYDRAULIC SYSTEM PRESSURE
• 3- 15 GPM HYDRAULIC PUMP
• 24 VOLT MICRO SWITCHES
• 2 PALM BUTTON BEND CYCLES MANUAL OR AUTOMATIC
• BEND CAPACITY FROM 1/2" (12.7MM) TO 3" (76.2MM) DIAMETER TUBE
• BEND RADIUS FROM 3" (76.2MM) TO 6" (152.4MM)
• 3/8" (9.5MM) MINIMUM RADIUS FOR SQUARE TUBE
• TOOL CHANGEOVER TIME ABOUT ONE MINUTE
• SEMI-AUTOMATIC BEND CYCLE OR AUTOMATIC BEND CYCLE
• MANUAL BEND READOUT FOR PROTOTYPE BENDING
• COMPLETELY SELF CONTAINED
• 1" (25.4MM) TO 2" (50.8MM) DIAMETER PIPE CAPACITY X 1/2" (12.7MM) WALL THICKNESS
• AMCO BRONZE BUSHINGS
• AMCO BRONZE WEAR PLATES ON MOVING GATE ASSEMBLY
• HARDENED WEAR PLATES ON BEND HEAD