THE MODEL RCP-8500-HCA IS A SPECIAL HIGH PRODUCTION TUBE BEAD MACHINE. THIS UNIT CAN BEAD A TUBE IN ABOUT 3 SECONDS. IT UTILIZES MECHANICAL TOOLING TO FORM THE BEAD. IT HAS A HYDRAULIC CLAMP ASSEMBLY THAT HOUSES THE O.D. OR FEMALE DIES. AN AIR SUPPLY IS NEEDED TO ROTATE THE TOOLING AFTER THE FIRST FORM. IT IS MOTOR DRIVEN AND HYDRAULIC POWERED. ALL CONTROLS ON AUTOMATIC OR MANUAL ARE DIRECTED BY A PLC SYSTEM. THIS UNIT CAN FORM BEADS TO M.S. STANDARDS OR OTHER SHAPE BEADS FOR SPECIAL APPLICATIONS. THE BEADS ARE FORMED ON TIME CYCLES AND THE CLAMP ASSEMBLY UTILIZES A 24 VOLT PROXIMITY SWITCH AND FOOT PEDALS TO INITIATE THE FORM CYCLE. ELECTRICAL AND HYDRAULICS ARE DETERMINED BY DIAMETERS AND WALL THICKNESS.

• UNIT IS A HIGH PRODUCTION TUBE BEADING MACHINE
• 230-440 VOLTS, 3 PHASE, 50/60 CYCLE
• 10 HP ELECTRIC MOTOR
• 3000 PSI MAXIMUM HYDRAULIC SYSTEM PRESSURE
• 20 TONS OF CLAMPING FORCES
• 10 TONS OF BEADING FORCES
• PLC SYSTEM TO CONTROL ALL MANUAL AND AUTO SEQUENCES
• UNIT WILL BEAD UP TO 21/2" (63.5MM) DIAMETER X .062 (1.58MM) WALL THICKNESS
• MINIMUM DIAMETER IS 3/8" (9.53MM) X .062" (1.58MM) WALL THICKNESS
• 100 PSI SHOP AIR REQUIRED
• WILL BEAD TO M.S. STANDARDS
• BEAD TOOLING MADE OF 8 SECTIONS AND FORMS 360° SIMULTANEOUSLY
• SEGMENT DIES WILL ROTATE AUTOMATICALLY FOR SECOND STROKE
• O.D. DIES MOUNTED ON HYDRAULIC CLAMP HEAD ASSEMBLY
• TOOL CHANGEOVER TIME - 15 MINUTES
• ALL TOOLING HEAT TREATED FOR LONG WEAR LIFE