THE MODEL HFBH-9501-A IS A UNIQUE ONE OF A KIND PRODUCTION BELLOWS-LIQUID-HYDRO-FORMING MACHINE FOR HIGH VOLUME BELLOW PRODUCTION. IT IS COMPLETELY SELF CONTAINED WITH (2) SEPARATE HYDRAULIC POWER SUPPLIES. ONE TO OPERATE THE MACHINE AND ONE TO PRESSURIZE THE TUBE. A PLC SYSTEM CONTROLS ALL MANUAL AND AUTO FORM CYCLES. THIS UNIT FORMS IN THE HORIZONTAL POSITION AND CAN FORM FROM 3" (76.2MM) TO 40" (1016MM) OF PREFORMED TUBE LENGTH. IT CAN FORM FROM 1/2" (12.7MM) TO 5" (127MM) OF PREFORMED DIAMETER. IT IS IDEAL FOR HIGH PRODUCTION DEPENDING ON TUBE LENGTH AND DIAMETER. ONE BELLOW CAN BE FORMED IN 5 TO 20 SECONDS DEPENDING ON DIAMETER AND LENGTH OF TUBE. IT IS MANUAL LOAD AND UNLOAD. AMH HAS DESIGNED A UNIQUE DIE SEPARATION SYSTEM FOR ESTABLISHING PREFORM PITCH DISTANCE OF THE DIES. TOOLING CAN NORMALLY BE CHANGED IN 2 HOURS.

Click here to see the Product Specification Worksheet

• 20 HP ELECTRIC MOTOR FOR MACHINE20 HP ELECTRIC MOTOR FOR PRESSURIZING TUBE ELECTRICAL REQUIREMENTS SPECIFIED BY CUSTOMER 50 OR 60 CYCLE, 230 - 500 VOLTS, 3 PHASE 3000 PSI MAXIMUM SYSTEM PRESSURE FOR MACHINE 5000 PSI MAXIMUM SYSTEM PRESSURE FOR BELLOWSMINIMUM PREFORMED TUBE LENGTH ---- 3" (76.2MM) MAX PREFORMED TUBE LENGTH --- 26 - 40" (660 - 1016MM) FESTO PLC SYSTEM FOR ALL MANUAL OR AUTO CONTROLS 24 VOLT PROXIMITY SWITCHES CONTROLS PEDESTAL MOUNTED WATER SOLUBLE GLYCOL FOR TUBE PRESSURE STANDARD HYDRAULIC OIL FOR MACHINE OPERATION FORM TIME OF 8-15 SECONDS DEPENDING ON BELLOW DIMENSIONSTOOL CHANGEOVER TIME ABOUT 2 HRSSELF PITCH SPACING TOOLING
• TOOLING HEAT TREATED FOR LONG WEAR LIFE